Water Heater Repairs – When To Call A Plumber

Calling a plumber to repair a faulty thermocoupler should only cost you up to $ 150. If you do the job yourself, you’ll only pay the cost of the part that’s on average about $20. The thermocoupler is in charge of detecting that the pilot light has been lit and then triggering the gas supply valve to keep supplying gas to the home. Thermocouplers are made up of two parts: A tube-like sleeve that pushes the heating element into the tank and a thermostat that keep the heating element from turning off. The most common problems with the thermocoupler are when it doesn’t turn off completely or if the valve malfunctions and won’t reset itself.

plumber

This is one of the most common problems associated with a heater or boiler but is also easiest to repair. To do so, contact your trusted Southlake Plumber. He’ll know what to do in most cases and will save you time and money in the long run. Here’s how you fix a water heater repair for the most common problems.

When your water heater is not working like it should, first determine if it is an electrical problem or not. Call an electrician to check the circuit breaker that controls the water heater to make sure that all of the circuits are open and functioning properly. You can determine this by flipping a switch on the electrician’s panel. If there is a high electricity reading, then your circuit breaker probably needs to be repaired.

Sometimes, a gas heater will also have a pilot light that is not working properly. If your gas heater produces less heat than the average cost of gas in your area, your pilot light could be faulty. To test this, turn the gas heater on and observe how much heat is produced before calling the plumber. This test is not intended to be a diagnosis for a malfunctioning gas heater, but rather a means to let the plumber know of any potential problems with your gas heater.

Some of the most common problems with water heaters can be traced to improper installation, such as missing, worn-out, or improperly installed flanges. Other problems include improper temperature control, such as a pump or expansion tank that is too small for your water heater. These types of issues can be easily corrected by the plumber. One thing to keep in mind when thinking about hiring a plumber, whether to repair or replace your water heater, is that you don’t always have to choose a company that you trust. There are some companies out there that have a reputation of poor quality workmanship and customer service.

The process of repair or replacement of heaters can be confusing for some people, especially those who aren’t familiar with plumbing. One of the first things a plumber will need to do, once he or she determines that your heater needs to be repaired or replaced, is to assess the damage. Water heaters are usually equipped with a device called a drain line that allows water to flow from the tank out through the drain line. If the pipe to the drain line has been clogged, caused by dirt, debris, or age, your plumber may suggest that the water is turned off and flushed through the drain line. The problem can be traced to the location of the clog, if the water is coming from a different part of the house, it will be necessary to locate the source of the blockage. This may require unscrewing and/or sealing the drain and the pipes surrounding it.

If the unit is a refrigerator-type unit, it will take longer to repair since it is more complicated and generally requires more tools and equipment. Most refrigerator-type units are under warranty, so it may be an easy task for a trained plumber. Refrigerator units that are more than nine years old should be repaired or replaced by someone who is licensed to do so in your area. Even though the appliance is made by the same company that makes the refrigerator, no two refrigerator units are exactly alike.

Although it is tempting to try to fix your water heater on your own, unless you are an experienced plumber, it is usually not a good idea. Calling a plumber to perform any type of repair to your water heating unit can be extremely expensive, especially if the plumber is inexperienced. It is far better to leave the task to the professionals and make sure that you follow all of the necessary safety precautions.